SHAFTS: The Model 450 Chain Drive standard shaft sizes are 1 1/4" (30mm) diameter on shafts #1 and #2 and 1 1/2" (35mm) on shafts #3 and #4. All shafts are made of high tensile strength steel.
CASE OR BOX: The one-piece grey iron case is precision machined for the bearings and seals. To eliminate possible oil leakage, no drilled and tapped holes enter the oil reservoir.
COVER PLATE: A one-piece grey iron cover plate houses the bearing behind the large sprocket on the assembly.
BEARINGS: Deep groove, precision ground radial ball bearings are used through out this unit. One bearing is located on each side of the chain sprocket, and provides the optimum arrangement for life, strength and rigidity.
OIL SEALS: A durable double lip seal is installed on each shaft.
OIL: 20 oz. AGMA 5EP GEAR LUBRICANT IS RECOMMENDED
WEIGHT: Aproximately 85 pounds.
SUGGESTED USES: The 450 Chain Drive can be used on grain transfer
applications, grain dryers, or any other application requiring a parallel
|1.1 Straight||1.35:1 Straight||1.5:1 Straight||1:1 Spiral||1.35:1 Spiral||1.5:1 Spiral||2:1 Spiral||3:1 Spiral||Flange Options|